Water and backdrops on the Verdi Railroad

More ideas and information on this O scale railroad
backdrop1
Visitors along the back of the garden have this view of Copper Gorge, the waterless water feature encased in recycled auto glass. The battery-powered Union Pacific MOW uses AirWire 900 and Soundtraxx Electronics. Both engines are powered (all 16 wheels drive) to pull full name train car sets.
Nancy Norris
backdrop2
The Southern Pacific ‘Red Car’ prototype ran in the San Francisco East Bay near the Verdi Railroad. TMCC controls this O-gauge Lionel trolley. Jacques calls his silver Santa Fe liner the ‘American TGV’ ('Train à Grande Vitesse', which means "high-speed train," France's intercity high-speed rail service). Shown, these '50s vintage Lionel trains with Pullmor motors converted to TMCC control and extensive sound can reach some high scale speeds, especially with two track-powered engines. Angela shares her backdrop-painting technique.
Nancy Norris
Verdi Railroad water story
In the old days, Acmeville was a small town fed from one well behind the grocery store on Main Street. Steam engines got water for their boilers directly from the river. The copper mines, now abandoned, brought the railroad to the region. Later, the town set up a pump station (now Ramon’s Cantina) next to the river to pump water into a tank for steam engines, and then the well was abandoned.

More recently... the water works moved down river. No need to replenish steam engines since the railroads have converted to diesel. Now the town represents late ‘50s/early ‘60s with booming Plasticville manufacturing, several railroads and a fledgling airport.

The plant connection... throughout its history Acmeville depended on the river for life. Although the mines brought the railroad, the river made the town livable... water... steam engines... town and flora flourishing. In a water-challenged state, the living scenery on the Verdi Railroad can depend on unseen gigantic water cisterns, filled from our 1:1 roof gutters during the rainy season.

2-D backdrop

We got the idea to use shade-cloth murals to hide our fence by volunteering at the Bay Area’s Roving Garden Railroad, where shade-cloth murals hide the trailer tongue. Wrapping the top edge of the fabric around a narrow board, we screwed the cloth to the very top of the fence and stretched it over a frame around the corner. I outlined the mountain peaks and began to paint, surprised at the large amount of paint necessary to get color to show up. Fabric just wicks the paint inside. I recommend using a high-quality paint and long bristled paintbrushes that hold a lot of paint. Even better is gathering a fair amount of paint on a painting knife to push the paint on the fabric. The knife edge works great for making vertical trees as well. We used recycled black shade cloth making sure to use the smoother “knit” side, not the opposite “purl” side. A curved upholstery needle and nylon thread stitched up our seams.


JOIN THE DISCUSSION

Read and share your comments on this article
COMMENT ON THIS ARTICLE

Want to leave a comment?

Only registered members of GardenRailways.com are allowed to leave comments. Registration is FREE and only takes a couple minutes.

Login or Register now.
0

FREE EMAIL NEWSLETTER

Get the Garden Railways newsletter delivered to your inbox twice a month

By signing up you may also receive occasional reader surveys and special offers from Garden Railways magazine. Please view our privacy policy